Hitachi G1000 User Manual Download Page 167

Page: 167 / 246

Note:

To create the pair specifying the S-VOL, specify the actual

LDEV ID (device name) of the S-VOL in the -d option of the paircreate

command.
The volume of the primary storage system changes to an S-VOL, and

the volume of the secondary storage system changes to a P-VOL.

Confirm that the P-VOL and S-VOL pair statuses change to PAIR

(Mirror (RL)).

pairdisplay -g oraHA -fxce -IH0

Group PairVol(L/R) (Port#,TID, LU),Seq#,LDEV#.P/S,Status,

Fence, %,P-LDEV# M CTG JID AP EM E-Seq# E-LDEV# R/W

oraHA dev1(L) (CL1-A-0, 0, 0)311111 2222.P-VOL PAIR

NEVER , 100 4444 - - 0 - - - - L/M

oraHA dev1(R) (CL1-C-0, 0, 0)322222 4444.S-VOL PAIR

NEVER , 100 2222 - - 0 - - - - L/M
pairdisplay -g oraHA -fxce -IH1

Group PairVol(L/R) (Port#,TID, LU),Seq#,LDEV#.P/S,Status,

Fence, %,P-LDEV# M CTG JID AP EM E-Seq# E-LDEV# R/W

oraHA dev1(L) (CL1-C-0, 0, 0)322222 4444.S-VOL PAIR

NEVER , 100 2222 - - 0 - - - - L/M

oraHA dev1(R) (CL1-A-0, 0, 0)311111 2222.P-VOL PAIR

NEVER , 100 4444 - - 0 - - - - L/M

Using the alternate path software, add an alternate path from the server

to the S-VOL (P-VOL before the failure).

Using the alternate path software, resume I/O from the server to the S-

VOL (P-VOL before the failure).
Note that I/O from the server might resume automatically.

Reverse the P-VOL and the S-VOL if necessary.

Related topics

•

I/O modes on page 1-12

•

Failure locations on page 6-3

•

SIMs related to GAD on page 6-6

•

Reversing the P-VOL and S-VOL on page 6-51

Pair condition and recovery: S-VOL failure (LDEV blockade)

The following table shows the transitions for pair status and I/O mode, the

volumes that are accessible from the server, and the location of the latest

data when you can no longer use the S-VOL due to LDEV blockade.

Disaster recovery of global-active device

6-15

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands