Hitachi G1000 User Manual Download Page 145

Page: 145 / 246

Protecting global-active device pairs

Using Replication Manager, configure in-system replication to further

safeguard the data on global-active device pairs in use by hosts on primary

and secondary storage systems.

Prerequisites

•

The copy type is ShadowImage or Thin Image.

•

The authentication mode is valid for the command device allocated to the

pair management server.

•

If the primary and secondary storage systems are managed by one pair

management server, you cannot use the virtual IDs of the virtual storage

machine used by the global-active device pair. To use virtual IDs, a

dedicated pair management server is required for each storage system.

Procedure

On the global task bar, from the

Tools

menu, select

Replication

Manager

Select a global-active device volume and click

Pair Management

The Pair Configuration Wizard opens.

In the

Copy Topology

window, select the P-VOL, click

Add Group

, and

in the

Add Pair Group

dialog box, select SI as the copy type. Click OK.

The

Copy Topology

window graphically reflects the addition of the SI

pair group to the P-VOL.

Note:

When you add a copy group to an existing copy pair, it is known as

multi-target

configuration when created on the primary side and a

cascade

on the secondary side. For more information, see the

Hitachi

Command Suite Replication Manager User Guide

In the

Copy Topology

window, select the S-VOL, click

Add Group

, in

the

Add Pair Group

dialog box, select SI as the copy type, and then click

The

Copy Topology

window graphically reflects the addition of the SI

pair group to the S-VOL.

Tip:

On the

My Copy Groups

tab, you can perform pair operations by

clicking the icon for SI (which displays SI pair information), and clicking

Change Pair Status

Select the

Finish

page in the Pair Configuration Wizard to complete the

task.

Result

The global-active device pair is further protected with in-system

ShadowImage replication.

Using Hitachi Command Suite to set up global-active device

5-17

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands