Hitachi G1000 User Manual Download Page 134

Page: 134 / 246

(Optional) Enter a

Label

for identifying the remote paths for global-

active device.

(Optional) Enter a non-default

Path group ID

Using the

Local Port

and

Remote Port

lists, select the Initiator and

RCU target ports from the

Existing Ports

list for both the primary

and secondary storage systems.

Tip:

The port list on the left shows primary to secondary storage

ports, and the port list on the right shows secondary to primary

storage ports. Note that the listed existing ports are unallocated host

ports, meaning a port attribute of target not in use by any hosts.

Click

Next

to review the remote path settings.

On the

Confirm

page:

Under

Initiator/RCU Targets

, review selected ports and port

attribute settings (before and after).

In the

Remote Path

area, check the copy direction for the local and

remote port pairs. If the port pairs are correct, select the confirmation

message checkbox, and click

Confirm

to set the port attributes

(Initiator or RCU Target).

Tip:

Port pairs on the left (Local -> Remote) are primary to secondary

storage remote paths. Port pairs on the right (Local <- Remote) are

the secondary to primary storage remote paths.

Note:

For more information about remote paths, see the

Hitachi

Command Suite Replication Manager User Guide

Result

The remote paths between the primary and secondary storage systems are

configured, and can be confirmed by clicking

Show Details

Related topics

•

About global-active device setup on page 5-2

Configuring the quorum disk

The quorum disk detects the status of the primary and secondary storage

systems. Configure the quorum disk by selecting a volume and virtualizing it

as an external volume of the primary and secondary storage systems.

Prerequisites

The primary and secondary storage systems have been selected.

Procedure

Open the global-active device setup window:

5-6

Using Hitachi Command Suite to set up global-active device

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands