Hitachi G1000 User Manual Download Page 136

Page: 136 / 246

Result

The quorum disk is created and virtualized for both the primary and

secondary storage, and can be confirmed by clicking

Show Details

Related topics

•

About global-active device setup on page 5-2

Configuring pair management servers

Configure the command devices for the pair management servers from the

primary and secondary storage systems. Command devices are used to

communicate pair management directives.

Prerequisites

The primary and secondary storage systems have been selected.

Procedure

Open the global-active device setup window:

From the

Actions

menu, select

Set up Global-Active Device

On the

Replication

tab,

General Tasks

, select

Set up Global-

Active Device

From

Configure Pair Management Server

, click

Allocate Volumes

for

the primary storage system.

In the

Allocate Volumes

dialog box, verify that the

Storage System

correct.

For

Host

, select the pair management server for the storage system.

Click

Advanced Options

, verify that

Command Device

is checked, and

that

User Authentication

Enabled

Click

Show Plan

and confirm that the information in the plan summary is

correct. If changes are required, click

Back

(Optional) Update the task name and provide a description.

(Optional) Expand

Schedule

to specify the task schedule.

You can schedule the task to run immediately or later. The default setting

Now

Click

Submit.

If the task is scheduled to run immediately, the process begins.

(Optional) Check the progress and result of the task on the

Tasks &

Alerts

tab. Click the task name to view details of the task.

Repeat steps 2 through 10 for the secondary storage system. For

Host

be sure to specify the pair management server for the secondary storage

system.

5-8

Using Hitachi Command Suite to set up global-active device

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands

Hitachi G1000, User Manual

Search results

Summary of Contents for G1000

Reviews:

Related manuals for G1000

Brands by name

Popular brands