HIKVISION DS-K3B601S Series, User Manual

Page: 96 / 124

• The configured parameters will be applied to the device automatically.
• When you change the working mode or connection mode, the device will reboot
automatically.
Enable M1 Card Encryption
M1 card encryption can improve the security level of authentication.
Steps
Note
The function should be supported by the access control device and the card reader.
1. Enter the Access Control module.
2. On the navigation bar on the left, enter Advanced Function → More Parameters .
3. Select an access control device in the device list and click M1 Card Encryption Verification to
enter the M1 Card Encryption Verification page.
4. Set the switch to on to enable the M1 card encryption function.
5. Set the sector ID.
Note
• The sector ID ranges from 1 to 100.
• By default, Sector 13 is encrypted. It is recommended to encrypt sector 13.
6. Click Save to save the settings.
7.8 Configure Linkage Actions for Access Control
You can configure different linkage actions for the event detected by the access control device.
After that, linkage actions will be triggered once the event happens. This mechanism is used for
notifying the security personnel the event, or triggering automatic access control in real time.
Two types of linkage actions are supported:
• Client Actions: When the event is detected, it will trigger the actions on the client, such as the
client making an audible warning..
• Device Actions: When the event is detected, it will trigger the actions of a specific device, such
as buzzing of a card reader and, opening/closing of a door, ..
7.8.1 Configure Client Actions for Access Event
Even if you are far away from an access point, you can still know what happens and how urgent the
event is via the client by configuring client actions for the access event. Client actions here refer to
the actions automatically executed by the client itself, such as making an audible warning and
DS-K3B601SX Series Swing Barrier User Manual
82