HIKVISION DS-K3B601S Series, User Manual

Page: 89 / 124

Figure 7-9 Remotely Open Door
Note
You can check Offline Authentication to enable the super password authentication when
the access control device is disconnected with the client.
Local Authentication and Super Password
Authentication by the access control device and by the super password.
4) Select the added person/card group in the left list below and it will be added to the Selected
list on the right as the authentication group.
5) Click the added authentication group in the right list to set authentication times in the Auth
Times column.
Note
• The authentication times should be larger than 0 and smaller than the added personnel
quantity in the personnel group.
• The maximum value of authentication times is 16.
6) Click Save.
Note
• For each access control point (door), up to four authentication groups can be added.
• For the authentication group of which authentication type is Local Authentication, up to 8
person/card groups can be added to the authentication group.
• For the authentication group of which authentication type is Local Authentication and Super
Password or Local Authentication and Remotely Open Door, up to 7 person/card groups can
be added to the authentication group.
7. Click Save.
7.7.4 Configure Custom Wiegand Rule
Based on the knowledge of uploading rule for the third party Wiegand, you can set multiple
customized Wiegand rules to communicate between the device and the third party card readers.
DS-K3B601SX Series Swing Barrier User Manual
75