HIKVISION DS-K3B601S Series, User Manual

Page: 65 / 124

7.4.6 Collect Face via Access Control Device
When adding person, you can collect the person's face via access control device added to the client
which supports facial recognition function.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person and click Add.
Note
Enter the person's basic information first. For details about configuring person's basic
information, refer to Configure Basic Information .
3. Click Add Face in the Basic Information panel.
4. Select Remote Collection.
5. Select an added access control device or the enrollment station from the drop-down list.
Note
If you select the enrollment station, you should click Login to set related parameters of the
device including IP address, port No., user name, and password. Also, you can check Face Anti-
Spoofing and select the liveness level as Low, Medium, or High.
Face Anti-Spoofing
If you check this function, then the device can detect whether the face to be collected is an
authentic one.
6. Collect face.
1) Face to the camera of the selected access control device and make sure your face is in the
middle of the collecting window.
2) Click to capture a photo.
3) Click OK to save the captured photo.
7. Confirm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and continue to add other persons .
7.4.7 Collect Fingerprint via Client
Collecting fingerprints locally means you can collect the fingerprint via the fingerprint recorder
connected directly to the PC running the client. The fingerprints recorded can be used as
credentials of the persons to access the authorized doors.
Before You Start
Connect the fingerprint recorder to the PC running the client.
DS-K3B601SX Series Swing Barrier User Manual
51