HIKVISION DS-K3B601S Series User Manual Download

Page: 73 / 124

7.4.18 Get Person Information from Access Control Device

If the added access control device has been configured with person information (including person

details, fingerprint, and issued card information), you can get the person information from the

device and import them to the client for further operations.
Steps

Note

• If the person name stored in the device is empty, the person name will be filled with the issued

card No. after importing to the client.

• If the card number or person ID (employee ID) stored on the device already exists in the client

database, the person with this card number or person ID will not be imported to the client.

1. Enter Person module.

2. Select an organization to import the persons.

3. Click Get from Device.

4. Select an added access control device or the enrollment station from the drop-down list.

Note

If you select the enrollment station, you should click Login, and set IP address, port No., user

name and password of the device.

5. Click Import to start importing the person information to the client.

Note

Up to 2,000 persons and 5,000 cards can be imported.

The person information, including person details, person's fingerprint information (if

configured), and the linked cards (if configured), will be imported to the selected organization.

7.4.19 Move Persons to Another Organization

You can move the added persons to another organization if you need.
Before You Start
• Make sure you have added at least two organizations.

• Make sure you have imported person information.
Steps

1. Enter Person module.

2. Select an organization in the left panel.

The persons under the organization will be displayed in the right panel.

DS-K3B601SX Series Swing Barrier User Manual

Summary of Contents for DS-K3B601S Series





























































































































Search results

Summary of Contents for DS-K3B601S Series

Reviews:

Related manuals for DS-K3B601S Series

Brands by name

Popular brands

HIKVISION DS-K3B601S Series, User Manual

Search results

Summary of Contents for DS-K3B601S Series

Reviews:

Related manuals for DS-K3B601S Series

Brands by name

Popular brands