Set Wiegand Parameters
You can set the Wiegand transmission direction.
Steps
Note
Some device models do not support this function. Refer to the actual products when configuration.
1. Click Configuration → Access Control → Wiegand Settings .
Figure 8-13 Wiegand Page
2. Check Wiegand to enable the Wiegand function.
3. Set a transmission direction.
Input
The device can connect a Wiegand card reader.
Output
The can connect an external access controller. And the two devices will transmit the card No.
via Wiegand 26 or 34.
4. Click Save to save the settings.
DS-K1TA70 Series Face Recognition Terminal User Manual
95
