Figure 7-11 Manual Attendance Mode
3. Enable the Attendance Status Required.
4. Enable a group of attendance status.
Note
The Attendance Property will not be changed.
5. Optional: Select an status and change its name if required.
The name will be displayed on the T & A Status page and the authentication result page.
Result
You should select an attendance status manually after authentication.
Note
If you do not select a status, the authentication will be failed and it will not be marked as a valid
attendance.
7.9.3 Set Auto Attendance via Device
Set the attendance mode as auto, and you can set the attendance status and its available schedule.
The system will automatically change the attendance status according to the configured schedule.
DS-K1TA70 Series Face Recognition Terminal User Manual
57
