Table 7-3 Temperature Measurement Parameters Descriptions
Parameter
Description
Temp. Detection
When enabling the function, the device will authenticate the
permissions and at the same time take the temperature. When
disabling the device, the device will authenticate the
permissions only.
Norm Temp. (Max./Min.)
Edit the threshold according to actual situation. If the detected
temperature is higher or lower than the configured parameters,
an alarm will be triggered. By default, the value is 37.3°.
Temp. Compensation
If the measured temperature is higher/lower than the actual
object's temperature, you can set the compensation
temperature here. Available range: -99 °C to 99 °C
Door Not Open (Abnormal
Temp.)
When enabling the function, the door will not open when the
detected temperature is higher or lower than the configured
temperature threshold. By default, the function is enabled.
Temperature Measurement
Only
When enabling the function, the device will not authenticate the
permissions, but only take the temperature. When disabling the
function, the device will authenticate the permissions and at the
same time take the temperature.
Unit
Select a temperature unit according to your preference.
Measurement Area Calibration Configure the temperature measurement area.
DS-K1TA70 Series Face Recognition Terminal User Manual
67
