The read card No. will be in reverse sequence after enabling the function.
If select Sub Card Reader:
Card Reader Type/Card Reader Description
Get card reader type and description. They are read-only.
Enable Card Reader
Enable the card reader's function.
Authentication
Select an authentication mode according to your actual needs from the drop-down list.
Recognition Interval
If the interval between card presenting of the same card is less than the configured value, the
card presenting is invalid.
Authentication Interval
You can set the authentication interval of the same person when authenticating. The same
person can only authenticate once in the configured interval. A second authentication will be
failed.
Alarm of Max. Failed Attempts
Enable to report alarm when the card reading attempts reach the set value.
Communication with Controller Every
When the access control device cannot connect with the card reader for longer than the set
time, the card reader will turn offline automatically.
Max. Interval When Entering Password
When you entering the password on the card reader, if the interval between pressing two digits
is longer than the set value, the digits you pressed before will be cleared automatically.
OK LED Polarity/Error LED Polarity
Set OK LED Polarity/Error LED Polarity of the access control device according to the card reader
parameters. Generally, adopts the default settings.
Enable Tampering Detection
Enable the anti-tamper detection for the card reader.
Set Door Parameters
Click Configuration → Access Control → Door Parameters .
DS-K1TA70 Series Face Recognition Terminal User Manual
91
