Must Check
The break duration will be calculated and excluded from work hours according to actual
check-in and check-out time.
Return from Break Early for
The actual check-in and check-out time does not exceed the break time, and can be
marked as normal work or work overtime.
Return from Break Late for
The actual check-in and check-out time exceeds the break time, and can be marked as
late, absent or early leave.
Calculated by
Each Check in/out: Each check-in time and check-out time is valid and the sum of all
periods between adjacent check-in and check-out time will be recorded as the break
time duration.
First In & Last Out: The first check-in time is recorded as start break time and the last
check-out time is recorded as the end break time.
Enable T&A Status
Set Enable T&A Status switch to on to calculate the actual break time according to
attendance status on the device.
Note
This function should be supported by the device.
Valid Authentication Interval
During the valid authentication interval, person swiping card for several times will only
be calculated as once when calculating attendance data.
6. Click Save to save the settings.
7. Optional: Click Add to continue adding break time.
Configure Report Display
You can configure display contents displayed in the attendance report, such as the company name,
logo, date format, time format, and mark.
Steps
1. Enter Time & Attendance module.
2. Click Attendance Statistics → Report Display .
3. Set the display settings for attendance report.
Company Name
Enter a company name to display the name in the report.
Attendance Status Mark
DS-K1TA70 Series Face Recognition Terminal User Manual
173
