9.4.2 Configure Basic Information
You can add person to the client one by one and configure the person's basic information such as
name, email, phone number, etc.
Steps
1. Enter Person module.
Note
For the first time you enter Person module, a window pops up, and you can set the rules to
generate person ID (letters and numbers supported) when adding person. When getting person
information from device, if there are no person IDs, the person IDs will be generated according
to the rule.
2. Select an organization in the organization list to add the person.
3. Click Add to open the adding person window.
The Person ID will be generated automatically.
4. Enter the basic information including person name, telephone number, email address, validity
period, etc.
5. Confirm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and continue to add other persons.
9.4.3 Issue a Card to One Person
When adding person, you can issue a card with a unique card number to the person as a
credential. After issued, the person can access the doors which he/she is authorized to access by
swiping the card on the card reader.
Steps
Note
Up to five cards can be issued to one person.
1. Enter Person module.
2. Select an organization in the organization list to add the person and click Add.
Note
Enter the person's basic information first. For details about configuring person's basic
information, refer to Configure Basic Information .
3. In the Credential → Card panel, click +.
4. Enter the card number.
-
Enter the card number manually.
DS-K1TA70 Series Face Recognition Terminal User Manual
117