8.5.19 Access Control Settings
Set Authentication Parameters
Click Configuration → Access Control → Authentication Settings .
Note
The functions vary according to different models. Refers to the actual device for details.
Click Save to save the settings after the configuration.
Device Type
Select Main Card Reader or Sub Card Reader from the drop-down list.
Main Card Reader
You can configure the device card reader's parameters.
Sub Card Reader
You can configure the connected peripheral card reader's parameters.
If select Main Card Reader:
Card Reader Type/Card Reader Description
Get card reader type and description. They are read-only.
Enable Card Reader
Enable the card reader's function.
Authentication
Select an authentication mode according to your actual needs from the drop-down list.
Recognition Interval
You can set the interval between 2 continuous recognition of a same person during the
authentication. In the configured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Authentication Interval
You can set the authentication interval of the same person when authenticating. The same
person can only authenticate once in the configured interval. A second authentication will be
failed.
Alarm of Max. Failed Attempts
Enable to report alarm when the card reading attempts reach the set value.
Enable Tampering Detection
Enable the anti-tamper detection for the card reader.
Enable Card No. Reversing
DS-K1TA70 Series Face Recognition Terminal User Manual
90
