HIKVISION DS-K1TA70MI-T User Manual Download

Page: 78 / 227

Online Update

If the device has been connected to Hik-Connect and network, when there is a new

installation package in Hik-Connect, you can tap Device Upgrade → Online Update to

upgrade the device system.

Update via USB

Plug the USB flash drive in the device USB interface. Tap Device Upgrade → Update via USB ,

and the device will read the digicap.dav file in the USB flash drive to start upgrading.

Unlink APP Account

After unlinking APP account, you cannot operate via APP.

Restore to Default Settings

All parameters, except for the communication settings, remotely imported user information, will

be restored to the default settings. The system will reboot to take effect.

Restore to Factory Settings

All parameters will be restored to the factory settings. The system will reboot to take effect.

Reboot

Reboot the device.

7.11 Video Intercom

After adding the device to the client software, you can call the device from the client software, call

the main station from the device, call the client software from the device, call the indoor station

from the device, or call the specific room from the device.

7.11.1 Call Client Software from Device

Steps
1. Get the client software from the supplied disk or the official website, and install the software

according to the prompts.

2. Run the client software and the control panel of the software pops up.
3. Click Device Management to enter the Device Management interface.
4. Add the device to the client software.

Note

For details about adding device, see Add Device.

5. Call the client software.

1) Tap on the device initial page.

2) Enter 0 in the pop-up window.

3) Tap to call the client software.

DS-K1TA70 Series Face Recognition Terminal User Manual

Summary of Contents for DS-K1TA70MI-T




































































































































































































































Search results

Summary of Contents for DS-K1TA70MI-T

Reviews:

Related manuals for DS-K1TA70MI-T

Brands by name

Popular brands

HIKVISION DS-K1TA70MI-T, User Manual

Search results

Summary of Contents for DS-K1TA70MI-T

Reviews:

Related manuals for DS-K1TA70MI-T

Brands by name

Popular brands