2. Check the checkbox of Enable to enable the function.
3. Select the Platform Access Mode.
Note
Hik-Connect is an application for mobile devices. With the App, you can view live image of the
device, receive alarm notification and so on.
4. Create a Stream Encryption/Encryption Key for the device.
Note
6 to 12 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use a
combination of no less than 8 letters or numbers.
5. Click Save to enable the settings.
Set ISUP Parameters
Set the ISUP parameters for accessing device via ISUP protocol.
Steps
Note
The function should be supported by the device.
1. Click Configuration → Network → Advanced Settings → Platform .
2. Select ISUP from the platform access mode drop-down list.
3. Check Enable.
4. Set the ISUP version, server address, device ID, and the ISUP status.
Note
If you select 5.0 as the version, you should set the ISUP key as well.
5. Click Save.
Configure HTTP Listening
The device can send alarm information to the destination IP or host via HTTP protocol/HTTPS
protocol.
Before You Start
The destination IP or host name should support the HTTP protocol/HTTPS protocol to receive the
alarm information.
Note
The function should be supported by the device.
DS-K1TA70 Series Face Recognition Terminal User Manual
80
