Minimum Card Swiping Interval
If the interval between card swiping of the same card is less than the set value, the card
swiping is invalid. You can set it as 0 to 255.
Alarm of Max. Failed Attempts
Enable to report alarm when the card reading attempts reach the set value.
Card Reader Type/Card Reader Description
Get card reader type and description. They are read-only.
Advanced
Enable Card Reader
Enable the function and e device can be used as an card reader.
OK LED Polarity/Error LED Polarity/Buzzer Polarity
Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the
card reader parameters. Generally, adopts the default settings.
Max. Interval When Entering PWD
When you inputting the password on the card reader, if the interval between pressing two
digits is larger than the set value, the digits you pressed before will be cleared
automatically.
Tampering Detection
Enable the anti-tamper detection for the card reader.
Communicate with Controller Every
When the access control device cannot connect with the card reader for longer than the
set time, the card reader will turn offline automatically.
Face 1:N Matching Threshold
Set the matching threshold when authenticating via 1:N matching mode. The larger the
value, the smaller the false accept rate and the larger the false rejection rate when
authentication.
Face Recognition Interval
The time interval between two continuous face recognitions when authenticating.
Face Anti-Spoofing
Enable or disable the live face detection function. If enabling the function, the device can
recognize whether the person is a live one or not.
Face 1:1 Matching Threshold
Set the matching threshold when authenticating via 1:1 matching mode. The larger the
value, the smaller the false accept rate and the larger the false rejection rate when
authentication.
Application Mode
DS-K1TA70 Series Face Recognition Terminal User Manual
139
