Max. Speaking Duration with Access Control Device
Specify the seconds that the call with access control device will last for at most. The
maximum speaking duration between access control device and the client can be set from
90s to 120s.
4. Click Save.
9.12.5 Set File Saving Path
The pictures captured in Status Monitoring module are stored on the local PC. The saving path of
these files can be set.
Steps
1. Open the System Configuration page.
2. Click File tab to enter the File Saving Path Settings page.
3. Click and select a local path for the files.
4. Click Save.
9.12.6 Set Email Parameters
When an event is triggered, if you can set Send Email as linkage action for this event, the client will
an email to the recipients for notification. You need to set the email settings and specify target
recipients in this section.
Steps
1. Enter the System Configuration module.
2. Click Email tab to enter the Email Settings interface.
3. Enter the required information.
STMP Server
The STMP server IP address of host name (e.g., smtp.263xmail.com)
Encryption Type
You can check the radio to select Non-Encrypted, SSL, or STARTTLS .
Port
Enter the communication port used for SMTP. The port is 25 by default.
Sender Address
The email address of the sender.
Security Certificate (Optional)
If your email server requires authentication, check this checkbox to use authentication to log
into the server and enter the login user name and password of your email account.
User Name
DS-K1TA70 Series Face Recognition Terminal User Manual
193
