9.14.16 Set Device No.
Set the device type, community No., building No., floor No., and unit No., and room No.
Click Maintenance and Management → Device to enter the device list.
Click to enter the remote configuration page.
Click Other → No. Settings and Set the device type, community No., building No., floor No., and
unit No., and No.
9.14.17 Configure Video and Audio Parameters
You can set the device camera's image quality, resolution and other parameters.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click to enter the remote configuration page.
3. Click Image → Video & Audio to enter the settings page.
4. Set the device camera's parameters, including the stream type, the bitrate type, the video
quality, the frame rate, the audio encoding type, the video type, the bitrate, the resolution, and
the I frame interval.
5. Click Save.
9.14.18 Configure Volume Input or Output
Steps
1. On the Device for Management page, click → Image → Audio Input or Output to enter Audio
Input or Output tab.
2. Move the block to adjust the device input and output volume.
3. Click Save.
9.14.19 Operate Relay
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click to enter the remote configuration page.
3. Click Operation → Relay .
4. Enable or disable the relay.
9.14.20 View Relay Status
Click Maintenance and Management → Device Management → Device to enter the device list.
DS-K1TA70 Series Face Recognition Terminal User Manual
204
