Hendi 231845 User Instructions Download Page 13

Page: 13 / 120

Check the integrity:
•  of the ﬁxed protections
•  of the closure superior cover
•  of the loading and unloading

mouths of the pressure

• of the machine body

All ﬁxed protections, etc.. must perform the function for which have been
foreseen. Indicated parts sight check to verify their integrity in their surface
external part. The parts must be however changed at the ﬁrst erosion signals
or breaking (cfr. Authorized Assistance Centre).

Check the functionality:
• of the control system parts /

control about the safety;

• of the control devices

All devices must perform the function for which have been foreseen. Control
directly the devices so that these ones determine the waiting function.
The actuators and all parts must be however changed to the ﬁrst erosion signals
or breaking (cfr. Authorized Assistance Centre).

Check the absence:
• of strange noises after

the starting

During the functionality checking of the control devices, if there are strange
noises, due for example to a seizing or mechanical breaks, stop immediately
the machine and activate the maintenance service.

For any intervention type or for the parts change that
are damaged,

activate the maintenance service

The possible change must happen with manufactu-

rer original products or at least of quality, safety and
equivalent characteristics. For analysis contact the
Authorized Assistance Centre.

PUT IN FUNCTION

The machine operator can put in function the machine following in order the under reported indications:
• Positive controls result for the preparation preli-

minary operations,

•  Positive controls result for the electric feeding,
•  Plug connection in opportune current socket,
•  Positive controls result for the assembly (discs

positioning control, etc…),

•  Positive controls result for the discs correct rotation,
•  Positive controls result / checks before the starting,
•  Positive controls result ﬁnalized to check the re-

spect of all safety conditions,

• Place the cover in the machine superior zone and

tighten the block knob;

• Place in a harvest basin in the machine anterior

zone in correspondence of the food product un-
loading mouth;

• Place in the machine left zone and start it activa-

ting the control device of START “I”,

• Introduce manually the feed product within the

loading mouth in accordance with the working
requirements and push it towards the low / cut-
ting zone or lowing gradually the pressure handle
or pushing it with the equipment pestle, making a
light pressure to obtain the better operative re-
sult, without submit with anomalous effort the
transmission parts. When the pressure or the
pestle come to the stoke end, lift them and repeat
the above described operations carrying on up to
the work cycle completion,

• At the end of the feed product introduction, or

when from the unloading zone doesn’t exile more
the product, stop the machine activating the con-
trol device of STOP “O”.

SWITCHING OFF

In succession, the switching off operations must follow what here under indicated:
• before the switching off wait the feed product exi-

le conclusion from the unloading mouth pushing
completely towards the low the pressure handle
and the pestle,

• stop the machine working the control device of

STOP “O”,

• disconnect the machine plug from the feeding

socket,

• perform the cleaning interventions.