HEIDENHAIN TNC 620 E, User Manual

Page: 541 / 840

Multiple-Axis Machining | The PLANE function: Tilting the working plane (option 8)
13
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
541
Comparison of the tilting orders:
Tilting order A-B-C:
1 Tilt about the non-tilted X axis of the workpiece coordinate
system
2 Tilt about the non-tilted Y axis of the workpiece coordinate
system
3 Tilt about the non-tilted Z axis of the workpiece coordinate
system
Tilting order C-B-A:
1 Tilt about the non-tilted Z axis of the workpiece coordinate
system
2 Tilt about the tilted Y axis
3 Tilt about the tilted X axis
Programming notes:
You must always define all three spatial angles
SPA
,
SPB
and
SPC
, even if one or more have the value 0.
Depending on the machine, Cycle
19
requires
you to enter spatial angles or axis angles. If the
configuration (machine parameter setting) allows
the input of spatial angles, the angle definition is the
same in Cycle
19
and in the
PLANE SPATIAL
function.
You can select the desired positioning behavior.
Further information: "Specifying the positioning
behavior of the PLANE function", page 554
Input parameters
Example
5 PLANE SPATIAL SPA+27 SPB+0 SPC+45 .....
Spatial angle A?
: Rotational angle
SPA
about the
(non-tilted) X axis. Input range from -359.9999 to
+359.9999
Spatial angle B?
: Rotational angle
SPB
about the
(non-tilted) Y axis. Input range from -359.9999 to
+359.9999
Spatial angle C?
: Rotational angle
SPC
about the
(non-tilted) Z axis. Input range from -359.9999 to
+359.9999
Continue with the positioning properties
Further information: "Specifying the positioning
behavior of the PLANE function", page 554