HEIDENHAIN TNC 620 E, User Manual

Page: 731 / 840

Test Run and Program Run | Program run
18
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
731
Block scan in a point table
If you start in a point table called by the main program, use the
ADVANCED
soft key.
Press the
BLOCK SCAN
soft key
The control shows a pop-up window.
Press the
ADVANCED
soft key
The control expands the pop-up window.
Point number =
enter the line number of the
point table you start with
Enter the
Point file =
name and path of the point
table
If required, press the
SELECT LAST BLOCK
soft
key in order to select the last saved interruption
Press the
NC Start
key
If you would like to start with the mid-program startup in a point
pattern, then proceed just as you would for starting in the point
table. Enter the desired point number in the
Point number =
input
field. The first point in the point pattern has the point number 0 .