HEIDENHAIN TNC 620 E, User Manual

Page: 738 / 840

MOD Functions | MOD function
19
738
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
19.1 MOD function
The MOD functions provide additional input possibilities and
displays. In addition, you can enter code numbers to enable access
to protected areas.
Selecting MOD functions
Open the pop-up window with the MOD functions:
Press the
MOD
key
The control opens a pop-up window displaying
the available MOD functions.
Changing the settings
As well as with the mouse, navigation with the keyboard is also
possible in the MOD functions:
Switch from the input area in the right window to the MOD
function selections in the left window with the tab key
Select MOD function
Switch to the input field with the tab key or ENT key
Enter value according to function and confirm with
OK
or make
selection and confirm with
Apply
If there are multiple possible settings available, then you
can show the selection box by pressing the
GOTO
key.
Select the desired setting with the
ENT
key. If you do
not wish to change the setting, close the window with
the
END
key.
Exiting MOD functions
Exit the MOD functions: Press the
END
soft key or the
END
key