HEIDENHAIN TNC 620 E, User Manual

Page: 408 / 840

Programming Q Parameters | Additional functions
10
408
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
Group
name Gruppen-
nummerID Systemdaten-
nummer Index Description
11 - Error status of probing:
0: Probing was successful
–
1: Touch point not reached
–
2: Touch probe already deflected at the start
of the probing process
Read values from or write values to the active datum table
500 Row number Column Read values
Read values from or write values to the preset table (basic transformation)
507 Row number 1-6 Read values
Read axis offsets from or write axis offsets to the preset table
508 Row number 1-9 Read values
Data for pallet machining
1 - Active line
2 - Pallet number from the PAL/PGM field
3 - Active row of the pallet table.
4 - Last line of the NC program for the current
pallet.
5 Axis Tool-oriented editing:
Clearance height is programmed:
0 = No, 1 = Yes
Index: 1 - 9 ( X, Y, Z, A, B, C, U, V, W )
6 Axis Tool-oriented editing:
Clearance height
The value is invalid if ID510 NR5 returns the
value 0 with the corresponding IDX.
Index: 1 - 9 ( X, Y, Z, A, B, C, U, V, W )
10 - Row number up to which the pallet table is to
be searched during block scan.
20 - Type of pallet editing?
0 = Workpiece-oriented
1 = Tool oriented
510
21 - Automatic continuation after NC error:
0 = Locked
1 = Active
10 = Abort continuation
11 = Continuation with the rows in the pallet
table that would have been executed next if
not for the NC error
12 = Continuation with the row in the pallet
table in which the NC error arose
13 = Continuation with the next pallet