Hardi ISOBUS VT, Operator'S Manual

Page: 90 / 104

11 - Fault finding
11.12
119 Warning Pendulum release failed. Time-out on sensor signal AI1 (E0.7.4 setting) when
attempting to unlock.
See table “TerraForce Pendulum lock” in terminal
specification xxxx
Reset by attempt to release.
Pendulum is locked unintentionally. The
suspension will be damaged.
Check the hydraulics connections and pressure.
Check Pendulum lock position sensor adjustment.
6
120 Warning STOP! PENDULUM LOCKED! Time-out on sensor signal AI1 (E0.7.4 setting) when
attempting to unlock and speed >E0.7.2 setting.
See table “TerraForce Pendulum lock” in terminal
specification ver 35
Reset by removal of coarse (either unlock
succeeded or speed<E0.7.2).
Pendulum is locked unintentionally when
attempting to spray. The suspension will be
damaged.
Check the hydraulics connections and pressure.
Check Pendulum lock position sensor adjustment.
7
121 Alarm Pendulum lock sensor. When TERRA FORCE boom hydraulics set-up has
been selected in menu E8.6.3.7
The alarm is generated:
•
if the sensor signal on AI1 is less than 0,5V.
•
Illegal transition. See table “TerraForce
Pendulum lock” in terminal specification ver
35
No or wrong signal from sensor. Shorted or
disconnected.
Check Pendulum lock sensor adjustment and/or
connection.
8
122 Warning Dynamic Center sensor. When TERRA FORCE boom hydraulics set-up has
been selected in menu E8.6.3.7
The alarm is generated, if the sensor signal on AI25
is less than 0,2V or exceeds 4,8V.
Reset by keypress “enter”.
Signal from sensor out of range. Shorted or
disconnected.
Check Dynamic center position sensor adjustment
and/or connection.
11
123 Warning Folding not allowed. Attempt to fold when speed >E0.7.2 km/h.
Folding blocked.
Reset when speed <E0.7.2 km/h or when fold
buttons are released.
It is not allowed to fold or unfold the boom while
driving. Stop the vehicle. 123
124 Reminder ISObus terminal recovered 126
125 Reminder ISObus bridge recovered 127
126 Reminder No Dilution Appears when dilution kit function is activated, and
no outputs are active. Fluid systems works normally. 128
127 Reminder Tank Dilution Appears when dilution kit function is activated, and
tank output is active. Suction from rinse tank.
Flush tank through tank cleaning nozzles.
129
128 Reminder Boom Dilution Appears when dilution kit function is activated, and
Boom output is active. Suction from rinse tank.
If nozzles are open - flush feed hoses.
If nozzles are closed - flush dump hose.
130
129 Warning Pump over speeding Pump RPM exceed 5000 RPM. Pump RPM exceed manufacturer’s limitation. 131
130 Warning Vehicle over speeding Forward speed exceed setting in E0 menu, and
MainFlowOnOff is on. Vehicle over speeding while spraying. 132
131 Warning Boom not in transport. When TERRA FORCE boom hydraulics set-up has
been selected in menu E8.6.3.7+8
The alarm is generated, if an attempt to bring the
boom into transport position failed, or if the user
forgot to bring it there.
Place boom in transport position before driving.
Check transport lock function.
Check boom height sensor.
10
132 Illegal
action
One function only! When TERRA FORCE boom hydraulics set-up has
been selected in menu E8.6.3.7+8
Appears on TERRA FORCE booms when the user
tries to us more than one function at a time.
It is not allowed to use multiple folding buttons/
functions simultaneously. 133
133 Illegal
action
Unfold inner wing. When TERRA FORCE boom hydraulics set-up has
been selected in menu E8.6.3.7+8.
Wrong folding sequence.
Do not attempt to fold outer wings, if inner wing is
not fully unfolded. 134
134 Illegal
action
Keep folding 1
st
outer wing. When TERRA FORCE boom hydraulics set-up has
been selected in menu E8.6.3.7+8.
Wrong folding sequence.
Finish the folding of 1
st
outer wing. 135
ID Type Text at display detail Criteria for fault
Operations disabled
Full screen Help text Pr