Hardi ISOBUS VT, Operator'S Manual

Page: 29 / 104

3 - Description
3.17
2. 1. 3. 03 time Actual time
2. 1. 3. 04 Work rate Rate shown in hectare per hour or acre per hour
2. 1. 3. 05 Actual volume rate Actual rate in liter per hectare or gallon per acre
2. 1. 3. 06 Tank contents Main tank contents
2. 1. 3. 07 Speed Driving speed
2. 1. 3. 08 Volume sprayed Readouts for Volume sprayed in currently active register
2. 1. 3. 09 Area sprayed Readouts for Area sprayed in currently active register
2. 1. 3. 10 Active boom size Active boom size including end nozzle
2. 1. 3. 11 Pressure Displays spray pressure if sensor is fitted
2. 1. 3. 12 Fan speed Displays Twin fan speed if sensor is fitted
2. 1. 3. 13 Wind Speed Displays wind speed if sensor is fitted
2. 1. 3. 14 Pendulum lock status Displays reading of pendulum lock sensor if fitted
2. 1. 3. 15 Pendulum unlock status Displays reading of pendulum unlock sensor if fitted
2. 1. 3. 16 Dynamic center position Displays Dynamic center position sensor if fitted
2. 1. 3. 17 Spray pump rev Displays revolutions if sensor is fitted
2. 1. 3. 18 Extra sensor 1F Readout from extra sensor 1 frequency
2. 1. 3. 19 Extra sensor 2F Readout from extra sensor 2 frequency
2. 1. 3. 20 Extra sensor 3A Readout from extra sensor 3 analog
2. 1. 3. 21 Extra sensor 4A Readout from extra sensor 4 analog
2. 1. 3. 22 Voltmeter Displays system voltage. Useful when fault finding
2. 1. 3. 23 Agitation Agitation valve opening
2. 1. 3. 24 RinseTank content RinseTank calculated content
2. 1. 3. 25 Slant angle Headland assist angle sensor
2. 1. 3. 26 Boom height Headland assist height sensor
2. 1. 3. 27 Reserved R R
2. 1. 3. 28 Reserved R R
2. 1. 3. 29 Reserved R R
2. 1. 3. 30 Reserved R R
2. 1. 3. 31 Reserved R R
2. 1. 3. 32 Reserved R R
2. 1. 3. 33 Nozzle size flow at 3 bar (45 psi) Calculated nozzle flow at 3 bar (45 psi)
2. 1. 3. 34
2. 1. 3. 35
2. 1. 3. 36
2. 1. 3. 37 PF bus + Voltage on PrimeFlow d
2. 1. 3. 38 PF bus - Voltage on PrimeFlow databus -
2. 1. 4 Show lower right
2. 1. 4. 01 Programmed volume rate Shows Programmed volume rate
2. 1. 4. 02 Boom flow Boom flow rate per minute sprayed out through the boom
2. 1. 4. 03 time Actual time
2. 1. 4. 04 Work rate Rate shown in hectare per hour or acre per hour
2. 1. 4. 05 Actual volume rate Actual rate in liter per hectare or gallon per acre
2. 1. 4. 06 Tank contents Main tank contents
2. 1. 4. 07 Speed Driving speed
2. 1. 4. 08 Volume sprayed Readouts for Volume sprayed in currently active register
2. 1. 4. 09 Area sprayed Readouts for Area sprayed in currently active register
2. 1. 4. 10 Active boom size Active boom size including end nozzle
2. 1. 4. 11 Pressure Displays spray pressure if sensor is fitted
2. 1. 4. 12 Fan speed Displays Twin fan speed if sensor is fitted
2. 1. 4. 13 Wind Speed Displays wind speed if sensor is fitted
2. 1. 4. 14 Pendulum lock status Displays reading of pendulum lock sensor if fitted
2. 1. 4. 15 Pendulum unlock status Displays reading of pendulum unlock sensor if fitted
2. 1. 4. 16 Dynamic center position Displays Dynamic center position sensor if fitted
2. 1. 4. 17 Spray pump rev Displays revolutions if sensor is fitted
2. 1. 4. 18 Extra sensor 1F Readout from extra sensor 1 frequency
2. 1. 4. 19 Extra sensor 2F Readout from extra sensor 2 frequency
2. 1. 4. 20 Extra sensor 3A Readout from extra sensor 3 analog