Hardi ISOBUS VT, Operator'S Manual

Page: 49 / 104

6.1
6 - Menu 2 Setup
Menu 2 Setup
General info
The following menu explanations assume you have mastered the general keystrokes and you can “find your way” to the
specific menu. If this is not so, please re-read section “Terminals and boxes” on page 3.3.
Menu 2.1 Display readout
It is possible to freely choose which functions will be shown in the display. The ISOBUS terminals have 6 different boxes (A,
B, C, D, E and F). Box A always displays the Volume rate. Boxes B - E display user selected information. Box F displays
information selected from the preset keys (Volume sprayed, Distance left, Volume rate, Speed, Tank contents or Area
sprayed).
A full list of possible readouts for boxes B - E can be found in the “Full menu structure” on page 3.15.
A.
Volume rate
B.
Selected with menu 2.1.1
C.
Selected with menu 2.1.2
D.
Selected with menu 2.1.3
E.
Selected with menu 2.1.4
F.
Selected with preset keys
˜
ATTENTION! As some readouts need extra sensors, the relevant sensor has to be connected to get a readout.
ESC key for ISOBUS terminals
Menu 2.1.5 changes how the ESC key is operated.
•
Menu 2.1.5.1 “Show ESC as softkey”:
Select this menu if there is no ESC button on
the ISOBUS terminal.
•
Menu 2.1.5.2 “Do not show ESC as softkey”:
Select this menu if the ISOBUS terminal has a
physical ESC button.
˜
ATTENTION! If the ESC softkey is removed on a display without a physical ESC button, navigation will become
impossible and will require service to fix. Only select menu 2.1.5.2 if a physical ESC button exists.