Hardi ISOBUS VT, Operator'S Manual

Page: 23 / 104

3 - Description
3.11
Functions
Auto functions general info
The Soft key buttons are used for the End Nozzle functions.
˜
ATTENTION! Refer to “B. Soft keys” on page 3.6 for information about how to enter the soft keys.
End nozzles (Fence line) (optional)
If End nozzles/Bi-jet are fitted, set the value to the equivalent coverage by the boom nozzles. E.g. End nozzle coverage is 5
feet. This is equal to [03 Boom nozzles]. Choose End Nozzles by pressing F1.
•
When end nozzle is active, it will be shown in the display with two icons at the ends of the boom line.
•
Set up of end nozzles/Bi-jet can be done from menu 3.3.4.
˜
ATTENTION! It is important that the volume applied from the end nozzle or Bi-jet matches the volume applied under
the boom. This is a comparison of volume per minute per length. (Liter/min/meter).
When the end nozzle or Bi-jet is active, the area covered and volume sprayed is calculated and registered. If “Active
boom size” is displayed, it will show an increase when the end nozzle or Bi-jet is activated.