Hardi ISOBUS VT, Operator'S Manual

Page: 86 / 104

11 - Fault finding
11.8
33 Illegal
action Steering not active - Over
speeding! When speed is too high for steering (SafeTrack ESP).
SafeTrack is disabled.
Steering is enabled upon keypress SafeTrack auto.
Speed too high for steering - slow down! 43
34 Waiting Start pump 2 Valves are positioned as in AutoWash table.
After press on softkey computer continues to next
step.
See also screen layouts.
Used by Autowash/AutoFill
Double pump must be started to flush hoses.
Stop and start Double pump with hydraulic lever, as
Warning prompts you to.
44
35 Waiting Stop pump 2 Valves are positioned as in AutoWash table.
After press on softkey computer continues to next
step. See also screen layouts.
Used by Autowash/AutoFill
Double pump must be stopped to avoid chemical
in boom.
Stop and start Double pump with hydraulic lever, as
Warning prompts you to.
45
36 Waiting Pause Upon press of softkey or low or high PTO pump
RPM or Flexcap RPM
See also screen layouts
Used by Autowash/AutoFill
AutoWash is paused by keypress. 46
37 Warning PrimeFlow Comm fault Communication to PrimeFlow SMCU’s are failing.
Fault is probably due to broken cable or bad
connectors for power or data. 47
38 Warning Output failing to sect 1 Detected by H-bridge on I2C bus Output failing to sect 1 48
39 Warning Output failing to sect 2 Detected by H-bridge on I2C bus Output failing to sect 2 49
40 Warning Output failing to sect 3 Detected by H-bridge on I2C bus Output failing to sect 3 50
41 Warning Output failing to sect 4 Detected by H-bridge on I2C bus Output failing to sect 4 51
42 Warning Output failing to sect 5 Detected by H-bridge on I2C bus Output failing to sect 5 52
43 Warning Output failing to sect 6 Detected by H-bridge on I2C bus Output failing to sect 6 53
44 Warning Output failing to sect 7 Detected by H-bridge on I2C bus Output failing to sect 7 54
45 Warning Output failing to sect 8 Detected by H-bridge on I2C bus Output failing to sect 8 55
46 Warning Output failing to sect 9 Detected by H-bridge on I2C bus Output failing to sect 9 56
47 Warning Output failing to sect 10 Detected by H-bridge on I2C bus Output failing to sect 10 57
48 Warning Output failing to sect 11 Detected by H-bridge on I2C bus Output failing to sect 11 58
49 Warning Output failing to sect 12 Detected by H-bridge on I2C bus Output failing to sect 12 59
50 Warning Output failing to sect 13 Detected by H-bridge on I2C bus Output failing to sect 13 60
51 Warning Output failing to bypass 61
52 Warning Electronic fuse 1 is on Voltage drop over electrothermal fuse 62
53 Warning Electronic fuse 2 is on Voltage drop over electrothermal fuse 63
54 Warning Electronic fuse 3 is on Voltage drop over electrothermal fuse 64
55 Warning Electronic fuse 4 is on Voltage drop over electrothermal fuse 65
56 Warning
RinseTank not full When main tank has been filled and rinse tank is empty. Remember to re-fill rinse tank.
66
57 Warning Main tank nearly empty Main tank empty (tank gauge value set in menu 2.5.2). Main tank is nearly empty. Consider distance
left before leaving field.
67
58 Warning Sections OFF If main ON/OFF is switched ON and one or more
sections are OFF. Note that one or more sections are switched OFF. 68
59 Warning
Spray pressure too high
Spray pressure too high (limit set in menu 2.5.3.1). Decrease speed or change to nozzles with larger
capacity.
69
60 Warning Spray pressure too low Spray pressure too low (limit set in menu 2.5.3.2). Change to nozzles of less capacity or increase
speed if safe. 70
ID Type Text at display detail Criteria for fault
Operations disabled
Full screen Help text Pr