Hardi ISOBUS VT, Operator'S Manual

Page: 50 / 104

6 - Menu 2 Setup
6.2
Menu 2.2 Auto functions
In this menu, several automatic functions can be set up for specific use.
Menu 2.2.1 Main ON/OFF
The Controller can be set to open the main ON/OFF function above a certain speed and close it below the same speed. This
allows the user to concentrate on driving.
•
If the speed is set at zero, the function is deactivated.
•
Suggested speed setting is spraying speed less 20%.
When the Auto ON/OFF function is active while the main ON/OFF
switch and boom section switches are on, the boom status symbol will
be blue with a bar across whenever the speed is below the preset speed.
This is to indicate that the main ON/OFF switch will automatically open
when the sprayer reaches the preset speed.
±
WARNING! Remember to set the main ON/OFF switch on the grip to OFF before leaving the field, otherwise the main
ON/OFF will open under transport.
˜
ATTENTION! When AutoSectionControl is used, the function should be deactivated as the AutoSectionControl will
overtake control of the main ON/OFF.
Menu 2.2.2 Foam Marker (optional)
The Controller can be set to operate the HARDI® Foam marker automatically through the main ON/OFF valve. When the
main ON/OFF is ON, it will automatically start the Foam marker.
Furthermore, the Foam marker can be set for up and back spraying or race-track (round and round) spraying.
Possible settings are:
Menu 2.2.3 DualLine (not used)
Menu 2.2.3.1 Lower pressure level (not used)
Menu 2.2.3.2 Upper pressure level (not used)
Menu 2.2.4 HeadlandAssist setup (not used)
Menu 2.2.5 TWIN preset shift auto/man (TWIN only)
This menu is to select if TWIN preset shifts is automatically at main ON/OFF or manually at key press.
Select the way to use the function in the submenus:
Setting Activity
Disable The marker will only follow the setting of the switch on the SetBox.
Same side The Terminal will automatically activate the same side for race-track spraying.
Change side The Terminal will automatically change side for up and back spraying.
Menu Function
2.2.5.1 Selects whether manual operation is done at the SetBox or at the buttons behind the grip.
2.2.5.2 Selects automatic shift every time the main ON/OFF is pressed.
2.2.5.3 Disables the function.