Hardi ISOBUS VT, Operator'S Manual

Page: 30 / 104

3 - Description
3.18
2. 1. 4. 21 Extra sensor 4A Readout from extra sensor 4 analog
2. 1. 4. 22 Voltmeter Displays system voltage. Useful when fault finding
2. 1. 4. 23 Agitation Agitation valve opening
2. 1. 4. 24 RinseTank content RinseTank calculated content
2. 1. 4. 25 Slant angle Headland assist angle sensor
2. 1. 4. 26 Boom height Headland assist height sensor
2. 1. 4. 27 Reserved R R
2. 1. 4. 28 Reserved R R
2. 1. 4. 29 Reserved R R
2. 1. 4. 30 Reserved R R
2. 1. 4. 31 Reserved R R
2. 1. 4. 32 Reserved R R
2. 1. 4. 33 Nozzle size flow at 3 bar (45 psi) Calculated nozzle flow at 3 bar (45 psi)
2. 1. 4. 34
2. 1. 4. 35
2. 1. 4. 36
2. 1. 4. 37 PF bus + Voltage on PrimeFlow d
2. 1. 4. 38 PF bus - Voltage on PrimeFlow databus -
2. 1. 5 Show ESC softkey to leave ISObus terminal can have a separate ESC key or use an ESC softkey
2. 1. 5. 1 Show ESC as softkey Choose this to show ESC key as softkey on ISObus terminal
2. 1. 5. 2 Do not show ESC as softkey Choose this if ISObus terminal has a separate ESC key.
2. 2 AUTO functions Set up for Auto ON/OFF, Foam marker, HeadlandAssist and optional A/B
2. 2. 1 Main ON/OFF For automatic operation of the main ON/OFF function at a pre-set speed
2. 2. 2 Foam marker To operate via the main ON/OFF function and automate side choice
2. 2. 2. 1 Disable It will only follow the manual setting of the switch on the SetBox
2. 2. 2. 2 Same side It will automatically activate the same side for race-track spraying
2. 2. 2. 3 Change side It will automatically change side for up and back spraying
2. 2. 3 Dual Line To set up lower and upper trigger limits for the operation of line A and line B
2. 2. 3. 1 Lower pressure level Key in pressure level to switch Dual Line to smaller nozzles
2. 2. 3. 2 Upper pressure level Key in pressure level to switch Dual Line to bigger nozzles
2. 2. 3. 3 From A to B speed level Key in speed to switch Dual Line from A to B
2. 2. 3. 4 From B to A+B speed level Key in speed to switch Dual Line from B to A+B
2. 2. 4 HeadlandAssist setup Boom lift and lower automatically when switching main ON/OFF function
2. 2. 4. 1 ON/OFF delay Distance delay so the boom will lift or lower via the main ON/OFF
2. 2. 4. 2 Boom height at headlands Key in 0 to disable HeadlandAssist Key in a height to enable
2. 2. 4. 3 Slant mirror or in steps Activate headland assist slant mirror or slant in steps.
2. 2. 4. 3. 1 Slant mirror and steps disable Traditional slant. No slant mirror. No slant in steps.
2. 2. 4. 3. 2 Slant mirror enable Activate opposite slant at headlands. Slant in steps not possible.
2. 2. 4. 3. 3 Slant in steps enable Activate slant in steps. Set step size in 2.2.4.4. Slant mirror not possible.
2. 2. 5 TWIN preset shift auto / man Shifts automatically at main ON/OFF or manually at keypress
2. 2. 5. 1 Manual shift at keypress Upon keypress it will change to the other preset value
2. 2. 5. 2 Auto shift at main ON/OFF It will automatically change to the other preset value
2. 2. 5. 3 TWIN controls disabled TWIN fan, angle and preset controls are disabled
2. 2. 6 AutoAgitation select level Powerful or soft no Agitation
2. 2. 6. 1 Powerful AutoAgitation Recommended for powder
2. 2. 6. 2 Soft AutoAgitation Recommended for liquid chemical
2. 2. 6. 3 No agitation Never use if sedimentation occurs. Recommended for liquid fertilizer.
2. 2. 6. 4 Fixed agitation Valve is positioned
2. 2. 6. 5 Agitation switch Switch increase or decrease agitation
2. 2. 7 AutoAgitation fixed level Key in position of agitation valve for FluidBox key and fixed level
2. 3 VRA / Remote control Variable Rate Application by RS232 Auto Section Control
2. 3. 1 VRA / Remote control disable Variable Rate Application / Remote control disabled. Dish icon disappear
2. 3. 2 VRA / Remote control enable by RS232 data port control enabled. Dish icon will be shown
2. 4 Set clock Change date and clock time
2. 4. 1 Time format (12 or 24 hour) Choose between a 12 hour or 24 hour clock
2. 4. 1. 1 12 hour format You have chosen 12 hours as your time unit
2. 4. 1. 2 24 hour format You have chosen 24 hours as your time