Hardi ISOBUS VT, Operator'S Manual

Page: 17 / 104

3 - Description
3.5
Display symbols
These symbols are common on VT (Virtual Terminal) displays.
1.
The 1st Line is for status symbols, register number and alarm
number. All status symbols will be displayed here.
˜
ATTENTION! If an error occurs, alarm/warning error number will
be shown instead of register number. The alarm/warning
number can be recognized by the exclamation sign in front of the
number.
2.
The 2nd Line is for boom status, foam marker and end nozzle
indications.
3.
ISOBUS: The bottom half has 6 boxes with selectable information.
÷
NOTE! See “Menu 2.1 Display readout” on page 6.1 for setup of
the display readouts in the bottom half of the terminal display.
1st line status icons
All “OK” Information Warning Stop (critical) Over or under
application
Volume rate
Automatic Variable rate (GPS)
active Volume rate Manual Pendulum Locked Pendulum
Unlocked
Track Crab left Track Crab right Track Lock Track Automatic Track Manual
Options A on Options B on Options both on Options both off
TWIN Preset 1 TWIN Preset 2 TWIN Manual
Auto mode
Nozzle size
calculated
Auto mode
No flow to sections
Auto mode
Nozzle size not
calculated
Manual mode
Nozzle size
calculated
Manual mode
No flow to sections
Manual mode
Nozzle size not
calculated
Increment steps
mode
Nozzle size
calculated
Increment steps
mode
No flow to sections
Increment steps
mode
Nozzle size not
calculated