DPO6000
，
MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1
- 43 -
Trigger setting 2:
Data source:CH3;Baud rate:19200;When:Data;Free level:high;Parity check:none;Data
number:8;Data:0×55.Adjust the trigger level, and the trigger result is shown as follows:
UART decoding interpretation:
1. Decoded data is displayed in hexadecimal;
2. Display color of decoded data is purple;
3. When “?”or "please adjust the time base"appears ,the time base needs to be adjusted
to get the decoded result.
6.5.13.LIN Trigger(optional)
LIN bus is a low-cost serial communication network defined for automotive distributed
electronic system, and it is a supplement to controller area network (CAN) and other
automotive multiplexing networks, Suitable for applications that do not require too much
on bandwidth, performance or fault tolerance of the the network. LIN bus is based on
SCI(UART) data format and adopts the mode of single master controller/multi-slave
device, which is a special case in UART.
