Hantek DPO6000 Series Manual Download

Page: 20 / 116

DPO6000

，

MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

- 18 -

READY

: All pre-trigger data has been acquired and the oscilloscope is ready to accept the

trigger.

:The oscilloscope has been triggered.

Roll

:In roll mode,the oscilloscopes will acquire and display waveform data continuously.

Stop

:The oscilloscopes will stop acquiring waveform data.

ARM

:Pre-trigger state.

3.The main time base of current window

Represents the length of time represented by each grid on the horizontal axis of the

screen.

4.Sampling rate,sampling point

Displays the current sampling rate and storage depth of the analog channel.
The sampling rate and storage depth vary with the horizontal base.

5.Waveform storage

6.Horizontal trigger time

Use the horizontal offset knob to adjust this parameter.Press the knob to quickly reset the

horizontal displacement.

7.Trigger level

Use the trigger level knob to adjust this parameter.Press the knob to quickly reset the

trigger level.

8.Operating menu to display the different information of each function keys

9.The time display of the oscilloscope

10.Wifi status display

11.Display the connection status of LAN

If the icon is lit or activated,the LAN is connected.

12.Display USB device status

If the icon is lit or activated,the USB guest is connected.

13.Display USB host status

If the icon is lit or activated,the USB host is connected.

14.Display LA status

If the icon is lit or activated,the LA channel is connected.

15.Display Gen3 status(some modes)

If the icon is lit or activated,the Gen3 channel is turned on.

16. Display Gen2 status(some modes)

Summary of Contents for DPO6000 Series





















































































































Search results

Summary of Contents for DPO6000 Series

Reviews:

Related manuals for DPO6000 Series

Brands by name

Popular brands

Hantek DPO6000 Series, Manual

Search results

Summary of Contents for DPO6000 Series

Reviews:

Related manuals for DPO6000 Series

Brands by name

Popular brands