Hantek DPO6000 Series Manual Download

Page: 82 / 116

DPO6000

，

MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1

- 80 -

two waveform is changed. At this point, press

AlignPhase

softkey and the waveform

shown on the oscilloscope will restore to the phase deviation of the current phase

between the two waveform automatically.

9.Recall

Press WaveGen

→

recall on the frontal panel.

Enter the call out menu, you can call out waveform Settings.

11.2.Edit Arbitrary Waveform

User can't edit arbitrary waveform directly under

WaveGen

interface for the device.

Firstly,please double click “WaveEditor Setup.exe” in WaveEditor folder in CD disk and

install Arbitrary Waveform Editor software according to installation wizard. After the

software installed successfully,you can see

WaveEditor

icon on desktop. Double-click the

icon to enter arbitrary waveform generator window.

Menu

Import from CSV

: Import the CSV format file to the arbitrary waveform generator window.

Export as CSV

: Save as CSV format file.

Import from ARB

: Import the ARB format file to the arbitrary waveform generator window.

Export as ARB

: Save as ARB format file.

Note

: The device can recall ARB format file in USB disk, but CSV format file can’t be

recalled by the device.

Toolbar buttons

:Download waveform data to the device.

Smooth Drawing Mode.

You can draw any waveform shape using the left-mouse.

Line Drawing Mode.

You can click on the waveform to draw a straight line from the

previous point.

Zoom tools.

To zoom the time axis in or out, click the

zoom button and then

click on the waveform area. Click the

100%

button to restore the time axis to its original

scale.

Standard waveform shapes.

Draw a standard waveform with the

settings specified in the numerical controls below the toolbar.

Cycles.

The number of cycles to draw. This control is used in conjunction

Summary of Contents for DPO6000 Series





















































































































Search results

Summary of Contents for DPO6000 Series

Reviews:

Related manuals for DPO6000 Series

Brands by name

Popular brands

Hantek DPO6000 Series, Manual

Search results

Summary of Contents for DPO6000 Series

Reviews:

Related manuals for DPO6000 Series

Brands by name

Popular brands