DPO6000
，
MPO6000 Series Digital Phosphor Oscilloscope Instruction V1.1
- 89 -
16.Historical Waveform
When you start to use the oscilloscope, the oscilloscope will automatically acquire and
store data, can acquire up to 8000 frames. Open the historical waveform can observe the
waveform stored before, and measure and analyze them.It is also possible to acquire
individual details or time-varying waveform at different speeds by setting time intervals
and waveform navigation. Each record is indexed by a timestamp,historical waveform
function can record the input waveform over a period of time before STOP.
Waveform playback function can play the current recorded waveform. During the playback,
the information shown in the figure below will be displayed in the upper right corner of the
screen. The data on the left side of the figure is the specific frame displayed on the current
screen, which changes constantly during playback. The data on the right represents the
maximum number of frames recorded.
16.1.Enable Segmentation Acquisition Function
1.Press
to play the next frame manually.
2.Press
to play the segmentation acquisition waveform in automatic sequence, the
playback interval can be set by the interval,press
to pause autoplay function.
3.Press
to play the last frame manually.
4. The minimum interval for autoplay is 10ms.
