P/N 53063-50, Manual Revision: B
Introduction
1-9
Computer
Guided Setup
The on-board microprocessor guides the operator through system setup by
displaying instructions on the display panel. For help in setting up the CS5+, press
the HELP key on the control panel. Figure 1-2 illustrates typical setup
instructions.
Figure 1-2: HELP display
Operators with multiple responsibilities involving frequent interruptions find the
setup instructions useful as a checklist. When called away from setup to attend to
another duty, the operator leaves the setup instruction as a reminder. When
returning to complete the setup, the operator checks the instruction and
continues from that point.
Caution:
The instructions provided by the display panel are not intended to
replace formal training by Haemonetics in the operation of the Cell Saver 5+
System, nor do they relieve the operator of the obligation to read this manual.
Performance
Readouts
The right hand side of the display panel provides information relative to the
operation of the system. Pump rate, wash volume, processed volume, number of
bowls processed, and product volume as well as current mode of operation are
constantly updated and displayed. The status of the CS5+ is available at a glance.
HELP
1. Prepare the collection (reservoir and suction).
2. Ready the machine and bowl disposable.
3. Install the bowl.
4. Hang the bags.
5. Install the tubing harness.
7. Inspect and finish.
Press START to resume
6. Set up the saline.
