GSK 980TC3 Series, Manual

Page: 83 / 226

Chapter 2 PLC Address, Parameter Setting
71
Ⅱ
Operation
Fig. 2-2-1
The content and operation of the timer:
RUN: Operation state of ladder diagram.
NO: Timer serial number; Do not change.
ADDR.: Timer address; Do not change.
CURT: Current value of the timer; Do not change.
SET: Presetting value of the timer; it can be changed after the password authority is open.
Input: display the input data
MDI mode: Current working mode
[Return]: Return to the previous menu
After modification, the system displays “KPAR downloading successful”; the system displays:
“downloading fail” when the save is incorrect; the “illegal downloading parameter” displays without
downloading conditions.
The search and positioning can be performed by the pageup, pagedown and four direction keys on
the panel; checking and modifying of the timer can be performed.
2.3 Data List
Press the [DATA] soft key in the Fig. 2-1, then enter the checking and setting interface of the
data list, refer to the Fig. 2-3-1.