GSK 980TC3 Series, Manual

Page: 195 / 226

Chapter 4 Machine Debugging
183
Inst
allation
and
Ⅳ
connection
3 4 6 Speed when the 5
th
axis zero return with low-speed
Data parameterNo.352
～ No.353
3 5 2 Acceleration/deceleration time constant of zero return with high-speed
3 5 3 Acceleration/deceleration time constant of zero return with low-speed
Data parameterNo.354
3 5 4 Speed of zero return deceleration stop to return to the machine zero
with low speed
Data parameterNo.180
～
No.184
1 8 0 Grid offset amount or reference point offset amount of the 1
st
axis
1 8 1 Grid offset amount or reference point offset amount of the 2
nd
axis
1 8 2 Grid offset amount or reference point offset amount of the 3
rd
axis
1 8 3 Grid offset amount or reference point offset amount of the 4
th
axis
1 8 4 Grid offset amount or reference point offset amount of the 5
th
axis
4.9 The Spindle Rotation (CW/CCW) Input/Output Signal Control
z Relevant signals
M03: The spindle CW rotation
M04: The spindle CCW rotation
M05:The spindle stops
SON: The spindle enable
SAR/PAR: The spindle speed reach
ZSP: The spindle zero speed detection
COIN: The spindle orientation in-position
System diagnosis
（
output state at side of the system
）
State
address
Y1.2 Y1.1 Y1.0
Pin
GL200
（
Y1.2
）
GL200
（
Y1.1
）
GL200(Y1.0)
Y1.0=the spindle rotation CW (double-spindle is the spindle 2 rotation CW); Y1.1= the spindle stop
(double-spindle is the spindle 2 stop);
Y1.2= the spindle rotation CCW (double-spindle is the spindle 2 rotation CCW).
State
address
Y6.0
Pin GL200(SPINDL44
female).24
Y6.0= The spindle enable.
System diagnosis （ input state at side of the machine ）
State
address
X6.2
Pin
GL200
(SPINDL4
female).24
X6.2=the spindle speed arrival signal.
State
address
X6.6 X6.5
X6.3
Pin
GL200
(SPINDL4
4
female).2
1
GL200
(SPINDL4
4
female).2
4
GL200
(SPINDL4
4
female).2
0