GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 132 / 216

132 JUPITER L-S and LCD Series Control Panel Instruction Manual
Section 6 — L-S Series Panel Operation
S100 Control Panel
For a summary of S100 functions see page 36 .
Figure 76. S100 Control Panel
L64 Panel Similarities and Differences
The S100 panel layout and operating procedures are nearly identical to the
L64 panel.
Significant differences include:
• One hundred assignable buttons instead of 64.
•
Sequence (Salvo)
,
Dest
, and
Source
buttons, which give direct access to the
menus used to select these items.
•
Assign & Select
button, also used to directly access button assignment
menus.
• The button used to protect and lock Destinations is labeled Lock instead
Lock/Protect
.
• The S100 panel does not have an
Undo
button.
• Alternate Mode operation (unique to the S100 L-S panel).
• Multi Destination mode operation (unique to the S100 L-S panel).
Basic S100 Operation
Refer to the following L64 procedures, which also apply to the S100 panel.
The only differences for S100 operations involves accessing menus. If you
wish, you can use the S100 panel’s
Sequence (Salvo)
,
Dest
,
Source
, and
Assign &
Select
buttons instead of the L64 panel’s
Menu
and
Up/Down
arrow buttons.
• Show Button Assignment on page 101
• Clearing Panel Modes on page 102
• Destination and Source Selection Methods on page 102
• Protecting a Destination on page 104
Protect/
Lock
Panel
ID