GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 109 / 216

JUPITER L-S and LCD Series Control Panel Instruction Manual 109
L32/L64 Control Panels
Blue in the preset window), and pressing the Take button returns the Des-
tination to that previous Source.
1. Press the
Menu
button, use the
Up/Down
arrow buttons to scroll to
Panel
Config?
and then press
Take.
2. Scroll to the Source Swap menu, which displays its current status (ON
or OFF).
3. Press
Take
to toggle the state ON or OFF and exit Menu mode.
Button Assignment
Panel buttons can be assigned different functions, to permit quick selection
of Destinations, Sources, levels, sequences, and overrides.
1.
Press
Menu
.
2. Use the
Up/Down
arrow buttons to scroll to
PanelConfig?
3.
Press
Take
.
4. Scroll to
Assign Buttons?
and press
Take
.
5.
The menu displays
Select Assignment Type
. Scroll to the button type you
wish to assign (Source, Destination, Level, Sequence, or Override) and
press
Take
.
6. Use the
Up/Down
arrow buttons to scroll through the list of available
items. When the correct item is displayed, press
Take
.
7. Press the button on the front panel to be used for this item. That button
will illuminate in red and its number will appear in the menu.
8. Press
Take
. The menu will then show
Save this Button Assignment?;
press
Take
.
9. The menu returns to
Select Assignment Type.
You can now repeat Step 6
through Step 8 above for more panel button assignments.
10. When done, press
Clear
to escape assignment mode.
Undo (L64 Only)
When Source Swap mode is OFF, the
Undo
button lights after each Take.
Pressing
Undo
presets the previous Source. Pressing
Take
at this time will
then route that previous Source to the Destination. By pressing
Undo
and
Take
repeatedly you can swap back and forth between two Sources.