GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 44 / 216

44 JUPITER L-S and LCD Series Control Panel Instruction Manual
Section 2 — Hardware Installation
L32/L64/S100 Panels
The L32 and L64 panels have 32 or 64 buttons respectively, on the left side
of the panel that can be used for Button-per-Source operation. The S100
panel has 100 buttons for this purpose. Using the label resources described
above, these buttons can be labeled 1 through 32, 64, or 100.
Figure 12. L32 with Custom Labels
If the button assignments are more or less permanent, you may want to
label them more specifically. An example is shown in
Figure 12 . See
Source
Button Configuration on page 46 for more information.
LD4 Panels
The LD4 panels have a cluster of 16 buttons on the right side that can be
used for category/number operation. See
Figure 13.
Figure 13. LD4 Control Panel
These buttons have default categories assigned, as shown in Figure 14 .
Figure 14. Type CPESXTND Input Set Default Categories
It is possible to configure the panel with a custom category set. Note that
the button order of the set is grouped with the first 10 entries on the left and
the following 6 entries on the right. See
Category Button Configuration on
page 46 for more information.
Preset
Destination
Status
VTR
1
VTR
2
VTR
3
VTR
4
VTR
5
VTR
7
VTR
8
VTR
9
VTR
6
VTR
1
CG
2
NET
3
VCR
4
1 2 3 4
CAM
5
AUX EJ SS
5
6 7 8
REM
6
FILM
7
PTCH
8
STU
9
9 10
11 12
TEST
0
SAT FS MISC
13
14 15 16 8536_42