GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 62 / 216

62 JUPITER L-S and LCD Series Control Panel Instruction Manual
Section 4 — Jupiter System Configuration
CP Level Set
The CP Level Set used for L-S panels is specified as type CP3800.
With L-S panels, the CP Level Set establishes the order in which levels are
displayed on the panel and the display mnemonics used for the various
levels (“Video,” “Left,” etc.). The display mnemonics have a maximum
length of eight characters.
CP Input and CP Output Sets
The CP Input and Output Set is specified as type CPESXTND for all L-S and
LCD models. The number of category buttons varies from panel to panel,
as indicated in
Table 1 .
For example, the LD4 panel provides a maximum of 16 categories; therefore
categories 17 through 98 (as shown by the Jupiter editor) will not be sup-
ported. The CP Input and Output sets are also the Source of the eight-char-
acter mnemonics displayed on the panel.
Further, the CP Input set determines which of the S25, S50, S100, L32, and
L64 Button-per-Source buttons is assigned to which Source. The upper left-
hand button of the panel will select the first Source listed on the CP Input
Set created and selected for this particular panel, the next button to the
right will select the next listed Source, etc.
Note The total number of units (Jupiter Entry Numbers) within a category is limited
to 4096. For example, the total number of machines within category “VTR” is
limited to 4096.
Table 1. Panel Category Buttons
L-S Panel Model
Number of Category
Buttons (default)
L32 None
L64 None
LD4 16
LD16 20
S25 None
S50 None
S100 None
SXY 16
LCD 98 (20 categories at a time)