GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 106 / 216

106 JUPITER L-S and LCD Series Control Panel Instruction Manual
Section 6 — L-S Series Panel Operation
To Unlock a Destination:
1. Confirm the Destination to be unlocked appears in yellow in the
Destination window (accomplished with Direct or Menu Destination
selection described earlier). The
Protect/Lock
button will blink red.
2.
Press
Protect/Lock
. The button will stop blinking and the
Take
button will
illuminate.
3.
Press
Take
to unlock the Destination. The
Protect/Lock
button will return
to low amber.
Breakaway Switching
Breakaway takes of individual levels can be performed by directly selecting
previously assigned Level buttons, or by using the menu.
Direct Selection Breakaway
Individual levels can be switched by first assigning Level buttons on the
panel (see
Button Assignment on page 109 ). You then select just the buttons
for the levels you want to switch before pressing the new Source button.
1. Confirm the Destination for the breakaway appears in yellow in the
Destination window (accomplished with Direct or Menu Destination
selection described earlier). The buttons assigned as Levels will
illuminate in amber.
2. Press the assigned Level buttons so only those you wish to switch are
illuminated. The name of the lowest numbered selected level will be
displayed in the menu.
3. Select the Source for those levels (by either Direct or Menu Source
selection as described in
Selecting a Source on page 103 ).
When an assigned Level button is individually selected (high amber), the
current Source (in blue) and level name (in red) for the currently controlled
Destination will be displayed in the menu.
Menu Breakaway Method
If individual Level buttons are not assigned, the menu display can be used
to perform breakaways.
1. Press the
Preset
button to activate preset mode.