GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 103 / 216

JUPITER L-S and LCD Series Control Panel Instruction Manual 103
L32/L64 Control Panels
Menu Selection Method
1. Clear the panel (
Level
,
Menu
, and
Preset
buttons OFF).
2.
Press the
Menu
button. The window will display configuration modes.
3. If necessary, use the
Up/Down
arrow buttons to scroll to
Select Destination?
mode.
4. Press
Take
. Destination names will appear in the Status (L32) or Preset
(L64) window.
5. Use the
Up/Down
arrow buttons to scroll to the desired Destination.
6.
Press
Take
. The Destination window will display the name of the
Destination now being controlled.
You will now be able to select a different Source for that Destination.
Selecting a Source
The following information explains how to select a source.
Working with a Locked or Procted Destination
If a Destination has been Protected or Locked by another panel, the
Protect/
Lock
button will illuminate steady amber (Protect) or red (Lock) and the
Destination will not be able to be switched. To continue:
• The Destination must be unprotected or unlocked by the panel that set
the protect or lock (the name of that other panel will be displayed in the
menu).
• The panel can force the destination to be unprocted or unlocked if the
pannel has a password set. See the
7.8.1 Jupiter Release notes (part #
071827511) for more information.
Direct Selection Method
Buttons configured for Sources illuminate in green.
1. Clear the panel (
Level
,
Menu
, and
Preset
buttons OFF)
2.
Press the low green button for the desired Source. The Source will be
switched to that Destination, the button will illuminate in bright green,
and the name for the Source will be shown in green in the Status
window.