GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 104 / 216

104 JUPITER L-S and LCD Series Control Panel Instruction Manual
Section 6 — L-S Series Panel Operation
Direct Selection with Preset
Preset allows you to confirm the identity of the Source before it is switched
to the Destination.
1. Press
Preset
so it is illuminated.
2.
Press the low green button for the desired Source. The Source will NOT
be taken to that Destination. Instead, the
Take
button will illuminate
along with the Source button just pressed, and the name of the Source
will be displayed in blue in the Status (L32) or Preset (L64) window.
Different Sources can be selected until the correct one is found.
3. Press
Take
. That Source will then be switched to the Destination.
4.
To exit Preset mode, press the
Preset
button so it is turned off.
Menu Selection Method
1. Clear the panel (
Level
,
Menu
, and
Preset
buttons OFF)
2.
Use the
Up/Down
arrow buttons to scroll through the available Sources.
The name of the currently chosen Source appears in blue in the Status
(L32) or Preset (L64) window, but will not yet be switched to the
Destination.
3.
Press
Take
. The Source will switch to the Destination and its name will
appear in green in the window.
Protecting a Destination
To Protect a Destination:
1.
Confirm the Destination to be protected appears in yellow in the
Destination window (accomplished with Direct or Menu Destination
selection described earlier).
2. Press
Protect/Lock
once. The button will illuminate in amber and the
Take
button will light green.
3. Press
Take
to protect the Destination. The
Protect/Lock
button will blink
amber.