GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 115 / 216

JUPITER L-S and LCD Series Control Panel Instruction Manual 115
LD4 Control Panel
5. The level windows will indicate status of the first 4 levels of the
switcher.
• If Sticky Levels is off, after the Take all levels will automatically be
deselected (their buttons will turn off). If Sticky Levels is on, only
the levels involved in the last Take will remain selected.
Sticky Levels Mode (LD4 Panel)
If Sticky Levels mode is ON, the level(s) involved in a breakaway Take
remain selected for subsequent Takes. To turn on Sticky Levels mode:
1. Press
Menu
. The display windows will display various modes.
2. Press the
Up/Down
arrow buttons to display
Panel Config?
in the D4
window and press its soft button.
3. The
Sticky Level
menu will be displayed in the D1 window with its
current status (ON or OFF).
4. Press
Take
to toggle the state ON or OFF)
The panel will exit Menu mode and operate with the new state.
LD4 Multiple Destination Mode
Multiple Destination mode (sometimes referred to as “multi-bus” mode) is
in effect when various Destinations, in yellow, appear in the D1-D4 win-
dows; and level names (“video” etc.) do not appear.
This mode displays the top level (For example, video) status for 4 Destina-
tions. Additional pages of Destinations each can be accessed using the
Up/
Down
arrow buttons. Multiple Destinations can be selected for single-Take
switching.
Entering Multiple Destination Mode
1. Press
Menu
. The display windows will display various modes.
2. Press the
Multiple Destination?
soft button. The D1 window will then
display the page number for the display (For example,
p00
). The D1-D4
windows’ first line contains the status of 4 Destinations.
• If Destinations are undefined, the windows will show a series of
dashes. To define Destinations, see
Adding or Changing a Destination Soft
Button Assignment on page 116 . You must define at least one Destina-
tion, for one of the D1-D4 windows, to use multiple Destination mode.