GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 178 / 216

178 JUPITER L-S and LCD Series Control Panel Instruction Manual
Section 11 — LCD Series Panel Operation
Note The Select Sequence mode requires that a least one sequence is assigned
using the Jupiter configuration.
Follow these steps to select a sequence or a salvo:
1. Press the Scroll wheel to go to the Main menu.
2.
Press the
Select Sequence?
button. The Sequence menu will then appear.
These buttons will be pink and the name of the sequence will be on line
#2.
3. Select the preferred Sequence; use the Scroll wheel to cycle through all
the available “sequence” pages as needed. The panel will return to the
last selected mode.
Select Override Mode
An Override is used to perform a pre-defined Take. The Take can include
Input, Output and Levels. Overrides can be done at any time, regardless of
which mode the panel is in.
Note The Select Override mode requires that a least one override is assigned using
the Jupiter configuration.
Follow these steps to select an Override:
1. Press the Scroll wheel to go to the Main menu.
2. Press the
Select Override?
button. The Override menu will then appear.
These buttons will be blue and the name of the override will be on line
#2.
3. Select the preferred Override; use the Scroll wheel as needed.
The panel will NOT revert back to the previous panel mode after each
selected override. This feature allows you to do several overrides within a
single session. Press the Scroll wheel to go to the Main menu to exit.