GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 124 / 216

124 JUPITER L-S and LCD Series Control Panel Instruction Manual
Section 6 — L-S Series Panel Operation
2. Press the
LEVEL
button so it is illuminated. All levels will be deselected
and their soft buttons will turn off.
3. Toggle ON the soft button corresponding to the level(s) to be switched.
To move beyond the first 14 levels, use the
Up/Down
arrow buttons.
4. Select a Source using one of the methods described under Selecting a
Source (Single Destination Mode) on page 121 .
5. Press
Take
. The Source will switch only on the selected levels, while the
non-selected levels will remain at the previously selected Source.
6. The level windows will indicate status of the first 14 levels of the
switcher.
• If Sticky Levels is off, after the Take all levels will automatically be
deselected (their buttons will turn off). If Sticky Levels is on, only
the levels involved in the last Take will remain selected.
Sticky Levels Mode
If Sticky Levels mode is ON, the level(s) involved in a breakaway Take
remain selected for subsequent Takes. To turn on Sticky Levels mode:
1. Press
Menu
. The display windows will display various modes.
2. Press the
Panel Config?
soft button. The
Sticky Level
menu will be
displayed with its current status (ON or OFF).
3. Press
Take
to toggle the state ON or OFF)
LD16 Multiple Destination Mode
Multiple Destination mode (sometimes referred to as “multi-bus” mode) is
in effect when various Destinations, in yellow, appear in the D1-D16 win-
dows; and level names (“video” etc.) do not appear.
This mode displays the top level (For example, video) status for 16 Desti-
nations. Additional pages of Destinations each can be accessed using the
Up/Down
arrow buttons. Multiple Destinations can be selected for single-
Take switching.
Entering Multiple Destination Mode
1. Press
Menu
. The display windows will display various modes.